Solar Power Grid

Satcon Solstice 100KW utility scale solar panel array grid tied inverter

Satcon Solstice 100KW utility scale solar panel array grid tied inverter
Satcon Solstice 100KW utility scale solar panel array grid tied inverter
Satcon Solstice 100KW utility scale solar panel array grid tied inverter
Satcon Solstice 100KW utility scale solar panel array grid tied inverter
Satcon Solstice 100KW utility scale solar panel array grid tied inverter
Satcon Solstice 100KW utility scale solar panel array grid tied inverter
Satcon Solstice 100KW utility scale solar panel array grid tied inverter
Satcon Solstice 100KW utility scale solar panel array grid tied inverter
Satcon Solstice 100KW utility scale solar panel array grid tied inverter
Satcon Solstice 100KW utility scale solar panel array grid tied inverter
Satcon Solstice 100KW utility scale solar panel array grid tied inverter
Satcon Solstice 100KW utility scale solar panel array grid tied inverter

Satcon Solstice 100KW utility scale solar panel array grid tied inverter

Two Satcon Solstice Inverters: (Were operating when taken out of service for upgrade). V (Range) 575 VDC, 1 (MAX) 182 ADC, OUTPUT 3 Phase, Power Factor 1, v (Range) 423V- 528V, F (Range) 59.3 Hz - 60.5 Hz, V (NOM) 480V, F(NOM) 60 Hz, 1 (MAX), P (MAX) 100kW 121A. Inverter #11 - (S/N: 300690B-A-001) Model SDMS0100480LNIUA (2600 LBS) NEMA 3R.

Inverter #12 - (S/N: SDABL29003) Model SDMS0100480LNIU (2600 LBS) NEMA 3R. 12% Improvement in Total Energy Harvest. 20-25% Reduction in Balance of System Expense. Boosts total system power production by 5-12%. Lowers overall balance of system costs by 20-25%.

Reduces installation time and expense. Enables string-level power optimization and centralized total system management.

Delivers advanced grid interconnection and utility control capabilities. Increases system uptime, safety and reliability. The industrys rst complete power harvesting and management solution for utility-class solar power plants. Solstice®, Satcons distributed energy management system, is an optimized end-to-end, panel-to-grid, solar PV electrical power generation system that focuses on improving total system performance, reducing overall balance. Of system costs and increasing system controllability, safety and uptime. Solstice is engineered from the ground up to provide granular control over every component in the arrayfrom a single string, to the inverter, to power delivered to the grid. With its sophisticated central command and control center, Solstice reacts to changing conditions with remarkable speed, providing the industrys rst complete power harvesting and management solution for utility-class power plants. Solstice breaks a large array into small strings of well matched modules and harvests the energy on the DC end in order to optimize the performance of the entire array. By introducing ne-grained energy production, including string-level MPPT, Solstice delivers higher energy yield, ensuring that the negative effects. Of shading, soiling and aging mismatch are localized and minimized while also being identi ed and reported.

Advanced Power Plant Control Capabilities. On the DC side, string-level instrumentation can be used to manage the array and trend its performance, providing visibility to poorly behaving elements. Of the array, including ground currents.

This enables centralized management and maintenance of the array and improves both day-to-day performance and safety. Satcon Solstice enables centralized, intelligent management of the entire PV system along with the exibility of localized control over every component in the array, from the panel, to a single string, to the inverter, to the gridthus serving as a total system solution.

Total System Monitoring, Diagnostics and Control. String level instrumentation provides greater visibility to poorly behaving elements in the system. Bidirectional communication allows you to send commands, and receive status and operating characteristics from the inverter. Ability to sense, identify and mitigate ground faults as they occurin milliseconds. Control of real and reactive power. Ability to stop, start and restart a solar PV power plant remotely. Simpli ed Utility SCADA system integration via the Solstice PV site controller. In any system, individual string IV curves are seldom identical due to shading, soiling. Or other causes of module mismatch. In a centralized system, this results in each string operating below its maximum power point, leading to suboptimal energy production from the whole system. The Solstice Subcombiner (SSB) performs string level Maximum Power Point Tracking (MPPT) and the DC to DC conversion. With Solstice, power output from each string is independently optimized, allowing each string to operate at its full potential all day long. As a result, energy production from the entire system is increased by 5-12%. String Level Maximum Power Point Tracking (MPPT).

MPPT ensures that the negative effects of module shading, soiling and aging mismatch are minimized and contained within the string. String Level DC to DC conversion. Boosts string voltages to a higher, xed level, reducing line losses and allowing the inverter to operate more ef ciently. Higher voltages result in lower current, permitting the use of smaller gauge cable, and a reduction in wiring costs. DC/DC conversion is accomplished with an ef ciency of 99%.

Up to 2% energy gain. Reduced Balance of System Expense by 20-25% while Gaining Greater Design Flexibility. Utilize smaller gauge, lower cost cable. Lower installed costs due to factory integrated total system design.

Greater design exibility by ability. To use different panel technologies, power ratings, vintages, sizes, mounts and brands in the same array. Up to 5% energy gain. Engineered from the ground up to meet the demands of large-scale installations, Satcon Solstice features NEMA4 SSB enclosure, NEMA 3S inverter electronic section, advanced monitoring and control capabilities, and EDGETM, Satcons next- generation MPPT solution. Total system intelligence and modular components make service ef cient.

String level Maximum Power Point Tracking (MPPT). Highly optimized DC to AC conversion. Total system monitoring, diagnostics and control. Advanced grid interconnection and utility control capabilities.

Natural convection cooled SSB for simplicity and high reliability. Hermetically sealed NEMA 4 Cabinet for Subcombiner and for power control electronics in inverter. Matches the output voltage of the PV inverter to the grid. The item "Satcon Solstice 100KW utility scale solar panel array grid tied inverter" is in sale since Friday, December 6, 2019. This item is in the category "Business & Industrial\Fuel & Energy\Alternative Fuel & Energy\Solar Power". The seller is "wholesaledeals2017" and is located in Parkville, Maryland. This item can't be shipped, the buyer must pick up the item.
  • Brand: Satcon
  • Model: SDMS0100480LNIUA
  • Bundle Listing: No
  • MPN: 300690B-A-001

Satcon Solstice 100KW utility scale solar panel array grid tied inverter