Intelligent LCD display various parameters. 1000W Grid Tie Inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Smart Micro inverter is synchronized and in-phase with the utility grid. The electric apparatus in the house will use power from the inverter first.
If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Why we produced the GRID TIE INVERTER WITH LIMITER?
It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated --- because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow.
In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. The 45-90V model inverter will start up at 49.5V, after starting, the voltage will drop to 45V, then inverter can work in 45-90V.
Voc 60-90V solar panels in parallel is suggested. For example:Voc=36V solar panel, we suggest 2 panels in series, then connect 2 or more groups in parallel. Rated Power (Peak/Continuous): 1000W / 900W DC Input Voltage: 45V90V AC Output Voltage Range: 110V/220V Auto Peak power tracking voltage: 49.582V AC Output Frequency Range: 46Hz65Hz Peak Inverter Efficiency: 92% Stackable: Just for AC Output Output Wareform: Pure sine wave. The 22-60V model inverter will start up at 26V, after starting, the inverter can work in 22V-60V. Solar Panel Voc cannot be higher than 60V.
Vmp 30v-48v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). Rated Power (Peak/Continuous): 1000W / 900W DC Input Voltage: 22V60V Peak Power Tracking Voltage: 2654V AC Output Voltage Range:110V/220V Auto Grid Tie Power Inverter starting voltage 26V AC Output Frequency Range: 46Hz65Hz Stackable: Just for AC Output Output Wareform: Pure sine wave.
47.5-51.5 for 50hz; 59.3-60.5 for 60hz. 1 x On Grid Inverter with Limiter(built-in) 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Stackable connectionThe purpose is let small power inverter become high-power inverter. Installation of GTIL With Internal Limiter. How to use the Power Limit function?
Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire. This installation is not require an additional limiter module, Installation is much easier.Clamp the current sensor cable to one of the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. Limiter Setting on the LCD of the inverter.
The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual.
Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level.
MPPT function of the inverter will auto invalid when working under this setting. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods.
Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful.Please give us the opportunity to resolve any problem. The item "1000W Solar Grid Tie Inverter with Power Limiter DC22-65V / DC45-90V for Home PV" is in sale since Tuesday, January 5, 2021. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters". The seller is "maihuiyan" and is located in NJ. This item can be shipped to United States.