Enphase IQ 7+ Interactive Inverter. Faster installation with improved, lighter two-wire cabling.
Optimized for high powered 60-cell and 72-cell modules. Highest EU efficiency of 96.5%. More than a million hours of testing. Class II double insulated IP67 enclosure.
Complies with advanced grid support, voltage and frequency ride-through requirements. Envoy and Internet connection required. Configurable for varying grid profiles. 235 W - 440 W +. 60-cell/120 half-cell and 72Cell/144 half-cell PV modules.27 V - 45 V. 16 V - 60 V. 22 V / 60 V. Max DC short circuit current (module Isc). 1 x 1 underground array; No additional DC side protection required; AC side protection requires max 20A per branch circuit. 1.21 A (240 V) 1.39 A (208 V). AC short circuit fault current over 3 cycles.
Maximum units per 20 A (L-L) branch circuit³. 13 (240 VAC) 11 (208 VAC). 97.5 % 97.3 %. 97.0 % 97.0 %.40ºC to +65ºC Relative humidity range. 4% to 100% (condensing) Connector type. MC4 (or Amphenol H4 UTX with additional Q-DCC-5 adapter) Dimensions (HxWxD).
212 mm x 175 mm x 30.2 mm (without bracket) 8.35x6.9x1.19 Inches Weight. 1.08 kg (2.38 lbs) Cooling.
Natural convection - No fans Approved for wet locations. NEMA Type 6 / outdoor. Power Line Communication (PLC) Monitoring. Enlighten Manager and MyEnlighten monitoring options. Both options require installation of an Enphase IQ Envoy.The AC and DC connectors have been evaluated and approved by UL for use as the load-break disconnect required by NEC 690. CA Rule 21 (UL 1741-SA) UL 62109-1, UL1741/IEEE1547, FCC Part 15 Class B, ICES-0003 Class B, CAN/CSA-C22.2 NO. Will be accepted for any reason. This item is in the category "Business & Industrial\Fuel & Energy\Alternative Fuel & Energy\Solar Power". The seller is "etaghizadeh" and is located in this country: US.
This item can be shipped to United States.