Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. Wide input voltage (15-60VDC), classification processing for different input voltages.It can work with different DC power supplies. AC Output Range :120VAC(90-140VAC) or 230VAC(190-260VAC). Frequency Range :50Hz/60Hz(Auto control). Islanding; Short-circuit; Converse Connection; Low. Voltage; Over Voltage; Over Temperature Protection. EMC EN61000-6-3:2007 EN61000-6-1:2007. Grid Disturbance EN 50178+EN 62109-1+VDE0126-1-12. Grid Detection DIN VDE 1026 UL1741. Mounting dimension 16 x 13CM. Alterations or repairs to the unit without prior authorization. Improper use or operation of device. Operating the equipment with defective safety devices. Impact of foreign objects and force majeure (lightning, surge, storm, fire). Inadequate or nonexistent ventilation of the device. The Product has been improperly stored or was damaged while in possession of the Dealer or end user. Only qualified electrical professionals can do the trouble shooting of the Smart Microinverter system. Please turn off the Smart Microinverter first and then disconnect.
The AC grid before disconnecting the Smart Microinverter from the PV module when remove the inverter from the rack. WARNING: Do not attempt to repair the Smart Microinverter.
If troubleshooting methods fail, please. 1.1 Red FAULT LED indicator lights up under any conditions as listed below. A Low-voltage protectionDC input voltage lower than Min. B Over-voltage protection DC input voltage higher than Max.
C Over-temperature protection inverters will be shut down for power output when. The temperature of body of inverters higher than 65-75 °C. Automatically restart up when the temperature of body of the inverter down to.D Power grid fault protection when 110VAC or 220VAC grid power outage and/or. E Islanding protection: inverter will be automatically shut down for power output. When disconnect with power grid.
F Short-circuit protection: inverter stops work when output line short-circuits. 1.2 Red LOW indicator: DC input voltage lower than 37VDC. 1.3 Red High indicator: DC input voltage higher than 37VDC. 1.4 Red Power LED indicator: Follow the inverter power output size flow flashing quickly.
A Blue LED flash: adjusting for power output, MPPT operating for tracking. B Blue LED long light: indicates inverter locking-in Max. A 120VAC/230VAC indicators: associated LED lights up when run for power grid voltage.B 50/60Hz indicators: associated LED lights up when run for frequency detection. Please note that above operations only run at grid-connected status. If the product has the following problems, we can assist you for repairing. 2: 230v or 110V LED, 50 Hz or 60 Hz LED, ST LED, and Low or High LED.
3: FAULT LED Lights, LOW or HIGH LED Lights, But No Power Output. Note:For the Inverter, we have 110V and 220V output voltage, US, AU, EU, UK, 4 types plugs.
Please leave a message to tell me the output AC voltage and Socket type you want, thanks! Width: 0 x height: 0 x length: 0 x weight: 0. We stand behind our products.
Most orders are in transit for two days but some may take longer. Thank you for shopping with us!
The item "Mppt 600W solar power on grid tie micro inverters pure sine wave 22-60V DC to120" is in sale since Tuesday, January 5, 2021. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters". The seller is "wild*things*on*sales" and is located in Zhejiang, China.
This item can be shipped worldwide.